輻射防護通風罩

說明

Radiation protection medical and radiation fume hood

1. Radiation protection fume hood shell

The shell is made of 1.5mm high-quality 304 radiation-proof plate, which is cut, positioned, punched, bent and welded in a CNC machining center. The surface is smooth and has no solder joints.

2. Radiation-proof fume hood inner shell

Use 10mm shielding lead plate.

3. Radiation-proof fume hood fluorescent lamp

The fluorescent lamp is hidden on the panel and does not come into contact with the air flow in the fume hood, making it easy to replace. It uses a 30W fluorescent lamp and is equipped with 5mm tempered glass.

4. Radiation-proof fume hood handle

Radiation-proof matt handle.

5. Radiation-proof fume hood deflector

Made of 5mm gray, laboratory-specific corrosion-resistant material that is resistant to acid, alkali and organic solvents.

6. Radiation protection fume hood power supply

Use laboratory-specific power sockets.

7. Radiation protection fume hood window

The aluminum profile is matched with a plastic profile frame. The window is made of three pieces of 5mm safety glass, which can be moved left and right. It also adopts a stepless balancing device, which can be moved up and down and adjusted freely.

8. Anti-radiation fume hood adjustment feet

It adopts φ10mm injection molded adjusting feet, which are shockproof, moisture-proof and corrosion-resistant. The height of the cabinet can be adjusted appropriately according to the indoor floor, and the adjustment height is 0-30mm.

9. Anti-radiation fume hood gas collecting hood

Made of PP material.

10. Radiation protection fume hood distribution box

Meets 220V and 380V power supply requirements, and has leakage and motor protection devices.

11. Radiation protection fume hood control switch

12V touch switch, centralized control of the entire circuit system

12. Radiation protection fume hood technology

After welding and polishing, all radiation-proof panels are visually smooth and have no solder joints. All water, electricity, and gas circuits must be safe, suitable, and installed concealed. Provide maintenance holes on the back panel of the cabinet.

13. Radiation protection fume hood deflectors (three pieces)

Harmful gases in spaces at different heights are discharged from different sections. The fume hood discharges the air in the fume hood at an operating surface wind speed of 0.5m/s to ensure that no residual gas exists. The ventilation efficiency is high, the exhaust volume is about 1600m3/h, and the noise is low.

14. Radiation-proof fume hood lower cabinet (general base cabinet), door panel

Made of 1.2mm high-quality 304 radiation-proof board (double-layer), weldless connection and removable shock-absorbing pad. It is formed in a CNC machining center, cut, positioned and punched, bent and welded. Fume hood manufacturers