Yellow light fume hood

Descrição

Special fume hood for yellow light room

1. Specifications: Length 1500* Width 800 Height 2350mm

2. Extra large internal space: length 1400*, width 680, height 1200mm

3. Countertop: Use 12.7mm thick core physical and chemical board countertop.

4. Description of the entire cabinet: The entire cabinet is welded with 8mm thick porcelain white PP sheets

5. Fluorescent lamp description: The fluorescent lamp is hidden on the panel and is not in contact with the air flow in the fume hood and is easy to replace. It uses 1 30W LED fluorescent lamp and is equipped with 5mm tempered explosion-proof glass.

7. Handle description: PP anti-corrosion handle.

8. Guide plate description: Made of 5mm white PP board.

9. Power supply description: Use a laboratory-specific power socket.

10. Window description: The aluminum profile is matched with a plastic profile frame. The viewing window uses a single piece of 5mm safety glass. The window can also be equipped with three pieces of 5mm safety glass, which can be moved left and right. The single piece adopts a stepless balancing device, which can move up and down and adjust freely.

11. Lifting system: Using imported belt lifting bearings, the glass window can be lifted up and down smoothly;

12. Adjustment foot description: The injection molding adjustment foot with a diameter of (10mm) is shockproof, moisture-proof, and corrosion-resistant. The height of the cabinet can be appropriately adjusted according to the indoor floor, and the maximum adjustment is 0-30mm.

13. Description of the gas collecting mask: Tired, slanderous, slanderous, arrogant, sad, loving, shore, noisy, spotted moxa, moxa tangerine, feibo, dad, guess, bake, cancer, shield, sorrow, eight, baby, love, no companionship, sorrow.

14. Leakage protection: Standard leakage and motor protection devices that comply with national standards

15. Control switch description: 12V touch switch, centralized control of the entire circuit system

16. Process description: The whole cabinet is made of hot-melt welded PP board, which is beautiful and elegant. There are maintenance holes on the back panel of the cabinet.

17. Three deflectors allow harmful gases in spaces at different heights to be discharged from different sections. The fume hood discharges the air in the fume hood at a speed above the operating surface wind speed of 0.5m/s to ensure that no residual gas exists. High ventilation efficiency, exhaust volume is about 2500m3/h, and low noise

18. Ventilation fan: PP centrifugal fan is used, and the fan warranty is 1 year.

19. The laboratory uses a high-efficiency activated carbon treatment module + photooxygen catalytic decomposition to treat the exhaust gas and effectively reduce atmospheric pollution.