![\"\"](\"https:\/\/www.smile-labfurniture.com\/wp-content\/uploads\/2026\/05\/4-2.webp\")
<\/p>\n<\/p>\n
![\"\"](\"https:\/\/www.smile-labfurniture.com\/wp-content\/uploads\/2026\/05\/9ed2a9785bb9790da07bea5c6a96ea2b.webp\")
<\/p>\n
MAIN MATERIAL
\nValve body: Made of H59-1 copper rod hot forging:
\nEyewash nozzle: thickened copper epoxy resin coating plus soft rubber, the water is decompressed and turned into a foamy water column to prevent eye injury
\nShower head guard: 170 rubber protective cup to avoid secondary damage caused by instant contact with eyes during emergency use
\nDust-proof cover: PP material, usually dust-proof, can be washed away by water at any time during use, and can reduce short-term high water pressure during use to prevent eye injury
\nWater flow lock switch: The water flow is turned on, and the water flow locking function is completed once, which is convenient to use.
\nWater control valve: check valve, the valve can automatically close
\nPre-filter: Equipped with a small pre-filter, it is mainly used to remove precipitated impurities and bacteria, microbial debris, rust, sand and mud and other particle impurities larger than 5 microns produced in the pipeline to avoid damage to the eyes and human skin.
\nWater supply hose: 1.5 meters in length, soft PVC pipe covered with stainless steel mesh and PE pipe wrapped in the outer layer to effectively prevent rust and leakage
\nWater output: double-port eyewash >11.4 liters\/minute, in line with the requirements of the American ANSIZ358-12014 eyewash standard
\nIdeal temperature: 27\u00b0C-37\u00b0C
\nRecommended pressure: 3bar-5bar
\nWithstand pressure: 10bar
\nWater inlet interface: G1\/2<\/p>","protected":false},"excerpt":{"rendered":"