Medical experimental bench

Description

1. Medical experimental bench top panel (color optional)

（1）. Choose 12mm thick acrylic artificial stone countertops

（2）. Choose 15mm thick quartz stone countertops

（3）. Use 12.7mm thick core physical and chemical board countertops

（4）. Use 15mm thick ceramic plate countertop
2. Medical experimental bench cabinet
It is an all-steel floor-standing structure and can be used alone or in combination. The height of the cabinet is 800-850mm.
（1）. Cabinet body (bottom plate, back plate): Made of 1.0mm thick Baosteel cold-rolled steel plate, which has been degreased, washed, pickled, washed neutralized, phosphated, washed and epoxy resin sprayed. Color: 27# blue wrinkle-22# white wrinkle, 66# blue-93# white, 68# blue-144# camel, 79# gray-93# white (optional)

All steel sample block.jpg

（2）. Side plate: Made of 1.0mm thick Baosteel cold-rolled steel plate, processed by degreasing, water washing, pickling, water washing neutralization, phosphating, water washing and epoxy resin spraying.
（3）. Laminate: 1.0mm thick Baosteel cold-rolled steel plate, processed by degreasing, water washing, pickling, water washing neutralization, phosphating, water washing and epoxy resin spraying. The distance between the upper and lower sections of the laminate is 15mm per grid.
（4）. Door panels and taps: Made of double-layer 1.0mm thick Baosteel cold-rolled steel plates, processed by degreasing, water washing, pickling, water washing neutralization, phosphating, water washing and epoxy resin spraying. The sandwich has sound-absorbing material.
（5）. Upper reinforcing beam, middle beam, drawer guide rail, sink support frame: made of 2.0mm thick Baosteel cold-rolled steel plate, degreasing, water washing, pickling, water washing neutralization, phosphating, water washing and epoxy resin spraying treatment.
（6）. Adjustment foot support plate: Made of 3.0mm thick Baosteel cold-rolled steel plate, processed by degreasing, water washing, pickling, water washing neutralization, phosphating, water washing and epoxy resin spraying.
（7）. Drawer: Bottom panel, side panels and back panel: Made of 1.0mm thick Baosteel cold-rolled steel plate, degreasing, water-washed, pickling, water-washed neutralization, phosphating, water-washed and epoxy resin spraying.
（8）. Decorative sealing board: When there is a gap between the base cabinets or between the base cabinets and the wall, use decorative sealing boards of the same material and color as the base cabinets to cover it.
（9）. Steel pipeline trough columns: a combination and detachable design.
（10）. Other structural design standards: The front of all base cabinets is a flat-mounted embedded structure design; except for the recessed part on the front, the skirting boards are integrally formed with the steel plates of the cabinet on both sides; there is no central vertical pillar blocking the two doors of all double-door base cabinets.
（11）. Service channel: There is a service channel distance from the wall behind the low cabinet, which is used to lay out electricity, water, and gas pipelines to hide the design.
3. Medical experimental bench accessories
（1）. Handle: Stainless steel C-shaped or aluminum alloy straight handle, which can be selected according to user needs.
（2）. Hinge: 90° opening, stainless steel hinge.
（3）. Door seam strip: made of polyvinyl chloride.
（4）. Door buckle group: Made of nylon material.
（5）. Shelf hook: made of 1.2mm thick stainless steel plate.
（6）. Slide rail: Use 450mm long silent slide rail with supporting base
（7）. Drawer door buffer device: made of rubber material.
（8）. Adjusting feet: M10mm screws (electroplating); Adjustable feet: rubber anti-slip shock-absorbing pads, high-strength steel frame feet
4. Medical laboratory bench reagent rack
The experimental bench manufacturer has a table-mounted design to facilitate configuration, addition, deletion and disassembly.
（1）. Steel pillar: Made of 1.5mm thick Baosteel cold-rolled steel plate, processed by degreasing, water washing, pickling, water washing neutralization, phosphating, water washing and epoxy resin spraying. The column has a whole row of hanging holes for hanging the adjustable shelves. The up and down adjustment distance between the hanging holes is about 40mm per grid.
（2）. Shelf: divided into upper and lower layers, made of 10mm thick tempered glass, with stainless steel guardrails on the outer edge of the shelf.
（3）. Power supply device.
（4）. Steel wire box: Made of 1.0mm thick Baosteel cold-rolled steel plate, processed by degreasing, water washing, pickling, water washing neutralization, phosphating, water washing and epoxy resin spraying.

(5）.Socket: Multifunctional universal 220V/10A socket.

All steel test bench manufacturer company

5. Medical laboratory bench wall cabinet

Medical laboratory bench manufacturers save space in hospital laboratories or treatment rooms by designing the upper part into a wall cabinet to facilitate the storage of more items.

(1). The entire cabinet body: Made of 1.0mm thick Baosteel cold-rolled steel plate, which has been degreased, washed, pickled, washed neutralized, phosphated, washed and epoxy resin sprayed.

(2). Laminate: Made of 1.0mm thick Baosteel cold-rolled steel plate, which has been degreased, washed, pickled, washed neutralized, phosphated, washed and epoxy resin sprayed. The distance between the upper and lower sections of the laminate is 30mm per grid.

(3). Hinge: 90° opening, stainless steel hinge.